7/11/2020 Jura Capresso Ena 5 User Manual
Here you will find answers to your questions about your JURA product. Select the product line and then the model. The product manual in PDF format, tips on using the product and any other available resources will appear on the tabs below.
Advertising
25.
EMPTY TRAY
.
9. Remove the cup and then the drawer and tray.
10. Empty drawer and ground coffee container and replace. 11. The display shows
READY
.
The machine will automatically remind you after the next 180
cups of coffee to repeat this cycle.
18.2 MANUAL TABLET CLEANING CYCLE
It is possible that the brewing process slows down before the automatic message (chapter 18.1) appears. Dark beans may deposit more oils into the brewing chamber. When this happens you can manually start a tablet cleaning cycle as follows:
READY
• Push and hold the P button (Fig. 4) until display shows
RINSE
.
• Push the P button again. The display shows again Download 3505 alpine manual free.
Mini wireless keyboard user manual ver 08rf 2.2. Your question will be posted here and emailed to our subscribers. To give a response to a question or answer, do not use this form but click on the button 'reply to this question';.
RINSE
.
• Turn the Rotary Dial until the display shows
CLEAN
.
• Push the Rotary Dial
EMPTY TRAY
Continue with steps 2 through 11 in chapter 18.1
18.3 DECALCIFYING
The ENA has an integrated decalcifying program. This decalcify- ing program takes about 40 minutes. Your ENA is set in the fac- tory to automatically remind you when it is time to decalcify the machine. If you do not use the Clearyl filter, we recommend that you purchase one set of Jura decalcifying tablets (one set is good for three decalcifying procedures). See chapter 31. Please note: If you have installed and activated the Clearyl filter, the decalcifying program is inactive. DECALCIFYING AGENT: Only use our special decalcifying tablets Model # 66281, chapter 31.
CAUTION:
• Avoid contact of the descaling agent with the skin or eyes.
This can cause irritation. Rinse the descaling agent off with
clear, clean water. Should you get descaling agent in your eyes, consult a doctor.
• Immediately remove any splashes or drops of the decalcifying
agent from sensitive surfaces, such as natural stone or wood.
• Always wait until the decalcifying agent in the water tank has
been used up. Do not fill additional decalcifying agent into
the water tank.
• Never use vinegar or any other decalcifying agent. This might
damage internal parts of the machine.
When the display shows
DE-SCALE
/
READY
it is time to
decalcify the machine. You can still make coffee. However, it is
highly recommended decalcifying the machine within the next 3 to 4 days. Important: CLEARYL FILTER: If you use the Clearyl water cartridge and the display shows
DE-SCALE
/
READY
, then your
cartridge function was not activated. Follow the instructions in
chapter 17.1 to activate a new cartridge. Important: The decalcifying program must not be interrupted.
DE-SCALE Espec model tse-11-a user manual guide.
/
READY
1. Remove the Dual Frother or the frothXpress from the steam
Jura Capresso Ena 4 Manual
nozzle (Fig. 17).
2. Open the cover behind the Rotary Dial and press the Rinse
button (Fig. 4) The display shows
EMPTY TRAY
.
3. Remove the complete drawer with the grid and the used
coffee container (Fig. 1, 12 to 14) and empty the tray and the
used coffee container.
Advertising
This manual is related to the following products:
Popular Brands
Jura Capresso Ena 5 User Manual At&t
Popular manuals
Comments are closed.
|